Titanium production and operation of new import regulations

Titanium production and operation of new import regulations
In order to combat smuggling of titanium, titanium heat exchanger rectify production and operation, to ensure the healthy development of China's titanium industry, the State Economic and Trade Commission, Ministry of Foreign Trade, the Customs Department and other seven departments, recently jointly issued "on the strengthening of titanium import management, production and operation order rectification notice. " "Notice" requirement: a strengthening of titanium import management. The titanium, titanium alloy, titanium alloy scrap pieces as the focus of sensitive goods imports, increase customs inspection efforts. Meanwhile, the focus of the trial price of titanium as customs goods, illegal imports and smuggling of titanium case, and resolutely punished according to law. Strict implementation of the relevant provisions of the State "Environmental Control (1996) No. 204" document is strictly prohibited titanium scrap, titanium scrap iron alloy, titanium alloy scrap import of waste to iron and steel, electrical appliances and other scrap metal imported or entrained in the name of imported titanium units and individuals, once discovered, in accordance with the relevant provisions of punishment. The titanium tube, titanium alloy included in the statutory inspection of the new product catalog by CIQ for the implementation of statutory inspection of imported titanium, do not meet the standards prohibit the export of new products. Second, to strengthen titanium processing production management. Titanium production enterprises for the production permit system, unlicensed businesses and individuals are not allowed to production and processing of titanium and its products. Third, rectify titanium market order flow. State titanium metal acquisitions and sales and titanium, titanium alloy, titanium alloy scrap (including unwrought titanium powder, profiles, etc.) of a unified management. Titanium has established ventures after SETC or its authorized approval, industry and commerce administration authorities for re-registration. The new application for the establishment of titanium enterprises approved by the state Economic and Trade Commission or its authorized after the industrial and commercial administrative authorities for registration. Without prior approval and registration, any businesses and individuals are not allowed to engage in business activities titanium. Recently, the State Administration for Industry in conjunction with the quality and technical supervision departments of Baoji Titanium market Shenyang two centralized rectification, strictly regulate the processing, marketing behavior of titanium products to enhance the quality of supervision and related products. Titanium wire is a new high-quality metals, widely used in various fields of national defense, cutting-edge technology and the national economy. Our country is one of the few countries in the world production of titanium. In recent years, low-grade titanium rampant smuggling in the country, some criminals fraudulent use of China's largest production base of titanium Baoji Titanium Industry Co., Ltd., brand and product certification, shoddy, deceptive, and even sales outside with chemical pollution Nuclear contamination of waste titanium, not only to the use of units planted a security risk, but also seriously affected the healthy development of China's titanium industry. "Notice" requirement customs, industry and commerce administration, quality and technical supervision departments to actively cooperate, intensify, and jointly improve the management and marketing of imported titanium rectification work.

Titanium rod model, production standards and technical requirements

Titanium rod model, production standards and technical requirements
Titanium rod corrosion resistance, high strength, good plasticity. Forging and car light can be divided into three kinds of polygons. (Ie; the hair sticks and light sticks two kinds). Chemical composition shall comply with the allowable deviation GB / T 3620.2 of.
titanium wire mesh rod production grades country signs No: TA1, TA2, TA3, TA7, TA9, TA10, TC4, TC4ELI, TC6, TC9, TC10, TC11
US signs numbers: GR1, GR2, GR3, GR5, GR7, GR12
Titanium rods perform standard GB: GB / 2965-2007, GB / T13810, Q / BS5331-91
American Standard: ASTM B348, ASTM F136, ASTM F67, AMS4928
A reference standard
1: GB 228 metal tensile test method
2: GB / T 3620.1 titanium bar stock and titanium alloys and chemical composition
3: GB / T3620.2 titanium and titanium alloy products and component tolerances chemical composition
4: GB 4698 sponge titanium, titanium and titanium alloy chemical analysis method Second, the technical requirements
1: Chemical composition of titanium and titanium electrodes alloy bars shall comply with GB / T 3620.1, the provisions to be repeated when the inspection, the chemical composition of the tolerances shall comply with the provisions of GB / T 3620.2 of.
2: thermal processing bar diameter or side table and tolerances shall comply with the provisions of one.
3: After thermal processing by car (mill) light bars and cold-rolled, cold drawn rod diameter tolerances shall comply with the provisions of Table II.
4: After thermal processing by car (mill) roundness light bars should not half its size tolerances.
5: Do not cut lengths processing state bar of 300-6000mm, annealed state bar does not cut lengths of 300-2000mm, length or double length should not cut lengths within the range of cut-length tolerance of + 20mm. ; double length of the incision should be included in the amount of bars, each incision amount of 5mm diameter tolerance of cold drawn bars should comply with the relevant regulations. The chemical composition shall comply with GB / T 3620.1, regulations.

Titanium and titanium jewelry products radiation

Titanium and titanium jewelry products radiation
Titanium and titanium alloys alloys as a rare metal, with a small proportion, high strength, high temperature resistance, corrosion resistance, high-quality corrosion lightweight structural materials, new functional materials and important biological engineering materials, mainly for the aerospace industry, chemical industry and the energy industry and other sectors.
There is a metal jewelry, can prevent radiation, can adjust the "three high", also can relieve fatigue, is a "small but perfectly formed." At present, some hit TV shopping product program, online, or even in front of some mall counters, marketers will recommend this kind of "magic" of titanium jewelry products, or necklace or bracelet, For a time, the magic of titanium jewelry for some consumers wide attention.
However, titanium jewelry, medical experts believe that the magic of titanium is not magic, its "magic" purely Bluff, consumers should keep their eyes open, to prevent fooled.
Titanium is not radiation protection;
Titanium is an important alloy steel and alloy elements, the density of titanium welding wire is 4.506-4.516 g / cm (20 ℃), higher than that of aluminum and less than iron, copper and nickel. However, at the head of the metal strength. Melting point of 1668 ± 4 ℃, latent heat of fusion 3.7-5.0 kcal / g-atom, the boiling point of 3260 ± 20 ℃, latent heat of vaporization 102.5-112.5 kcal / g-atom, the critical temperature of 4350 ℃, the critical pressure of 1130 atm. Thermal and electrical conductivity properties of titanium is poor, similar or slightly lower than stainless steel, titanium superconducting, titanium superconducting critical temperature 0.38-0.4K. At 25 ℃, the heat capacity of titanium is 0.126 cal / gram atom · degree, enthalpy 1149 cal / g-atom, the entropy of 7.33 cal / g atom · degree, titanium is paramagnetic, permeability of 1.00004.
In a TV shopping program, a Korean designer titanium bracelet played such a slogan: modern high-tech products generally easy because while passively suffer because of the convenience brought about by the many side effects of radiation

TIP of titanium and titanium alloys

TIP of titanium and titanium alloys
Titanium is a refractory metal of a light metal, a density of 4.5 g / cm3, 57% only of iron. Strength titanium plate alloy with high strength comparable to steel, but also has good heat resistance and low temperature performance, long-term work at certain alloy between 450 ℃ ~ 550 ℃ and minus 250 ℃.
Circular blade cutter suitable for milling titanium, because they may be appropriate to change the main angle. As long as these cutters equipped with special blades and apply the correct cutting parameters, under normal circumstances can improve the stability and overall performance. Feed per tooth should be set to the minimum amount, which is crucial.
Titanium and titanium - titanium milling need the right conditions compared with most other metal materials processing, titanium bolts processing requires not only higher, but more limited. This is because the alloy has metallurgical characteristics and material properties and cutting action may have a serious impact on the material itself. However, if you select the appropriate tools and use them correctly and in accordance with the requirements of the titanium processing tools and configuration optimization to the best condition, then fully meet these requirements, and obtain satisfactory performance and perfect results. Many of the problems of traditional titanium metal processing encountered is not inevitable, as long as the properties of titanium to overcome the effects of the process, we can succeed.
Various properties of titanium parts and materials to become a powerful attraction, but many of the properties but also affect its workability. titanium bar stockhas excellent strength - weight ratio, which is usually only 60% of the density of steel. Titanium elastic coefficient lower than steel, so the texture is harder, better deflection. Erosion-resistant stainless steel is better than titanium, and low thermal conductivity. These properties mean that titanium metal in the process will produce higher and higher concentration of cutting force. It is prone to vibrations caused by the tremor occurred while cutting; and, it is easy to react with cutting tool materials in cutting Shihai, thus exacerbating the crater wear. In addition, its thermal conductivity is poor, mainly because of the heat in the cutting area, so the processing of titanium metal tool must have a high thermal hardness.

Introduction What are the characteristics of titanium?

Introduction What are the characteristics of titanium?
Titanium used in petroleum, chemical, pharmaceutical, food industry, has a pivotal role. titanium bars and titanium alloys can be long-term work between 450 ℃ ~ 550 ℃ and minus 250 ℃. Titanium has good salt tolerance classes, the ability to seawater and nitric acid corrosion, Ti-30M alloy is resistant to high concentrations of hydrochloric acid and sulfuric acid corrosion.
Titanium for pitting, etching, stress corrosion resistance is particularly strong; alkali, chloride, chlorine, organic materials, nitric acid, sulfuric acid, etc. have excellent corrosion resistance. However, the corrosion resistance of titanium with a reduction of oxygen and chromium salts medium is poor. Here Xiaobian to introduce titanium characteristics.
Titanium plate is kind of the equivalent of the surface oxide film with a good durable wear hair separating agent, using titanium plate plates save seed separating agent, make peeling easier plate, eliminating the pre-treatment process kinds of plates, titanium plates than seed copper starting sheet to light half titanium starting sheet is more than three times the life of the copper seed plate, depending on the operating conditions of up to 10 to 20 years. Titanium plate preparation seed crystal structure of copper dense, smooth surface, good quality. Because titanium species sheet without smearing separating agent, and thus avoid the contamination of copper electrolyte.Increase productivity reduce copper production costs, which have better economic benefits.

Zunyi Titanium status quo can produce inevitable readjustment

Let Zunyi Titanium anxiety, as well as challenges from the market: Once the relocation of existing capacity, Zunyi Titanium inevitable readjustment, which allowed future business full of variables. 

Nearly seven years after efforts have not opened to door listing, Zunyi Titanium heat exchanger began to deal with another more complex projects: relocation. 
Zunyi Titanium according to previous listing and financing plan, the funds raised will be used to invest additional 10,000 tons of titanium sponge expansion project, the total investment totaling 999.8 million yuan. 
Zunyi Titanium chairman Guo Xiaoguang told the media that the reason to withdraw the IPO application, the main reason is that the overall relocation decision Zunyi Titanium, this move will affect the company's equity investment projects implementation. 
Zunyi City, according to local urban planning, and to the implementation of the southern industrial area "retreat into three city back into the park," the enterprise within the area covered by a "remote technical innovation, the overall relocation." Zunyi Zunyi Titanium Sheet Metal and titanium parent plants are in his column. 
But this move imperative call five or six years later, there has been no substantive movement. 
Zunyi Titanium a retired employee said, now move it, the government had no money, loss of business because no money, "you move to the area involved, the equipment, the original old equipment a move to be scrapped." 
It is reported that other companies can move equipment, machine tools away on the line, Titanium metal supply sponge enterprises to move, it can only be reconstructed, which makes this old state-owned enterprises dilemma. Reporters learned that, corporate relocation, the government does not give money, Zunyi Titanium now rely on loans already in production, the debt ratio of 50% or so. 
Because Zunyi Titanium Financial Officer on a business trip, the reporter was not informed of a more detailed financial data. 
Let Zunyi Titanium anxiety, as well as challenges from the market: Once the relocation of existing capacity, Zunyi Titanium inevitable readjustment, which allowed future business full of variables. "If we have money, we move past the first plant built and up and running, stopped on the line here. But now no money, then go over there and removed the side of production, to the market late in 2034, which how the line? "Panting Xiang said. 
It is understood that the domestic titanium plant by the first two grown to more than 40, affected by the financial crisis drained group, currently more than 20 left. In the meantime, titanium sponge along with the rapid expansion of production capacity, resulting in "more than 100,000 tons of production capacity, the use of only a few million" surplus situation. 
Panting Xiang believes that now the price has reached the bottom of titanium sponge, the future even if the rebound is small, "After all, the current production has more than tripled the demand." 
But relocation has become a trend, therefore, Zunyi Titanium can only hope to send bond financing, "now has a 5 million bond financing is in place in batches, January 19 this year, has come to a one hundred million." Panting Xiang said, without misappropriating public yet, but the bond issuers to repay.

Chemical classification of titanium

Chemical classification of titanium
Titanium is allotrope, melting point 1668 ℃, showed a close-packed hexagonal lattice structure, called α titanium bars at temperatures below 882 ℃; body-centered cubic lattice structure at above 882 ℃ was called β titanium. The use of the different characteristics of the two titanium structures, adding appropriate alloying elements, so that the phase transition temperature and relative content of different tissues obtained by gradually changing the titanium (titanium alloys). At room temperature, there are three titanium matrix organization, titanium will be divided into the following three categories: α alloy, (α + β) alloys and β alloys.